Pool Table Moving Service Perth Helps To Relocate

Moving a pool table by yourself or with a few buddies will need a near-complete disassembly of the table and a substantial amount of muscular effort to carry the remaining components. You’ll need carpentry skills, organization, and a few strong buddies, as well as some specialized tools and equipment. Depending on the size and general condition of the pool table, three to five persons may be required to move the table without harm or damage successfully. A rock core is used to construct excellent tables.

These are not to be taken lightly. Also, dismantling a pool table is far more complex than it appears on the surface. These aren’t dining room tables with a few unscrewable legs and leaves to remove. No, removing the felt from the slate is a laborious operation that may leave you with grey hairs, and replacing it is even more difficult. It is always recommended to call for a pool table moving services in Perth. 

As a result, follow our instructions carefully and don’t skip any stages to transport your pool table correctly- 

1. Disassembling a pool table- A pool table should be dismantled entirely before moving. You may believe that you can manhandle this beast and transport it in its whole through corridors, doors, downstairs, upstairs, and into a moving van or truck without dismantling it, but you would be mistaken. You can call Pool table movers in Perthto help you with the moving process.

The tools you need- 

• Staple puller
• Flathead screwdriver
• Socket wrench
• Power drill
• Was
• Paint scraper

2. Choosing the Best Place for Your Pool Table to Be Moved– Are you having problems locating the ideal location for your pool table? You’ll need enough space to utilize the pool sticks without slamming them against the walls and ruining your game, as well as a location to keep all of the essential equipment. The best option is to choose a room without a carpet. Although a table may be levelled on the rug, the instability of the rug makes it more probable that one leg will sink more than the others over time, especially if the carpet is thick.
3. After you’ve moved your pool table, you’ll need to reassemble it– We hope you labelled all of your parts and stored them in a convenient location. Keeping all of the screws and nuts in their correct bags and knowing where they belong will make reassembling much easier, but it will still be difficult. Putting your pool table back together presents several difficulties.

You’ll need help flipping the pool table back over since you’ll need to rebuild the legs or base under the frame with the pool table upside-down. The slate must then be installed, which is sadly not as simple as simply replacing it as it was when it was removed. No, you must level the slate to the floor, which will need shims to ensure the table is precisely level. Otherwise, your game will be off, maybe to the point of being utterly unplayable. Levelling the slate is a more difficult task than you may think, so take your time and do it correctly.